Dyna Beads, has anyone used them?

Topics related to the ownership, maintenance, equipping, operation, and riding of the R1200R.

Moderator: Moderators

Post Reply
Widetrack
Lifer
Posts: 37
Joined: Fri Feb 27, 2009 6:51 pm

Dyna Beads, has anyone used them?

Post by Widetrack »

Hi all, has anyone used Dyna Beads ceramic beads for motorcycle tire balancing? Neither of my wheels have any weights. I can't believe the tires are that well balanced. These beads sound interesting. Anyone using them?

http://www.innovativebalancing.com/

Enjoy the day
Widetrack
Shenandoah Valley Va.

'07 R12R
'00 Ducati ST2
'72 Triumph Bonnieville
hirschg
Basic User
Posts: 72
Joined: Wed Jun 14, 2006 3:59 pm
Donating Member #: 0
Location: Pittsburgh, Pa.

Re: Dyna Beads, has anyone used them?

Post by hirschg »

I have been using them since last year. They work great been up over 90mph no problems I have recommended them to all my riding buddys I had them installed when I had the new tires mounnted last year at a local Honda dealer the parts guy said he has more BMW riders come to their shop to have dyna beads installed than any other type of bike.
Go for it
Jerry
2003 R1150R
BLK 03 R1150R
User avatar
mogu83
Lifer
Posts: 1695
Joined: Mon Mar 19, 2007 6:40 am
Donating Member #: 0
Location: Harry Costello Jersey Shore, NJ

Re: Dyna Beads, has anyone used them?

Post by mogu83 »

I have a friend that has been using them for over a year and he says they work fine. I'm running RideOn in my tyres so putting the beads in is out of the question.
Harry Costello -- Jersey Shore
2007 R1200R
1974 + 75 CB125S
1971 R75
2020 Guzzi V85TT
BMWMOA 57358
bobw
Basic User
Posts: 288
Joined: Sat Jan 10, 2009 4:11 pm
Donating Member #: 0
Location: Morganton, NC

Re: Dyna Beads, has anyone used them?

Post by bobw »

I've never used either. Does the RideOn cause a mess when changing tires? I always carry a puncture kit, but this could allow for 1 less thing to pack.

Cheers

Bob
User avatar
mogu83
Lifer
Posts: 1695
Joined: Mon Mar 19, 2007 6:40 am
Donating Member #: 0
Location: Harry Costello Jersey Shore, NJ

Re: Dyna Beads, has anyone used them?

Post by mogu83 »

Don't want to steal the thread. I had a small nail in the rear and it was leaking, put in RideOn, pulled nail out and put another 5/6K on tire with no air loss. I figure for $10 a tire it's cheap insurance, I still carry a StopNGo plug kit. They (RideON) say the stuff helps to balance the tyre but I can't confirm that, and couldn't find anyplace on the net that would confirm that. It does stop leaks. Unlike Slime (Green Stuff) the RideOn seems to stay in place when the tire is removed.
Harry Costello -- Jersey Shore
2007 R1200R
1974 + 75 CB125S
1971 R75
2020 Guzzi V85TT
BMWMOA 57358
deilenberger
Honorary Lifer
Posts: 4210
Joined: Thu May 03, 2007 9:21 pm
Donating Member #: 0
Location: New Jersey USA
Contact:

Re: Dyna Beads, has anyone used them?

Post by deilenberger »

bobw wrote:I've never used either. Does the RideOn cause a mess when changing tires? I always carry a puncture kit, but this could allow for 1 less thing to pack.

Cheers

Bob
No mess at all. I've helped change my tires - and all the "RideOn" goop was in a band about 2.5" wide right in the center of the tire carcass (where the center of the tread would be.) None at all on the rim, which impressed me. Apparently Slime(tm) is known for making a mess.

I now just figure it's SOP to put it in after getting a new tire. I had it seal a leak in my first rear tire on the R12R - and no fuss, no muss. I still carry a stringy-thingie puncture kit and an AirHawk compressor to invoke Eilenberger's Law - you'll never need what you have (I have used it on other people's tires..)

RideOn=Thumbs Up!
Don Eilenberger - NJ Shore
2012 R1200R - I love this bike!
User avatar
parkec
Triple Lifer
Posts: 240
Joined: Mon Jul 09, 2007 12:04 pm
Donating Member #: 0
Location: Under the Skyway

Re: Dyna Beads, has anyone used them?

Post by parkec »

How about a http://www.beadrider.com/ seat :D

Got it last week, and took it for a 390 mile test drive on sunday. My butt kinda hurtt by the time I got home, but then I was tired, and little dehydrated.
...............................................................
IBA #50026
bobw
Basic User
Posts: 288
Joined: Sat Jan 10, 2009 4:11 pm
Donating Member #: 0
Location: Morganton, NC

Re: Dyna Beads, has anyone used them?

Post by bobw »

Thx for the info. Sounds good.

Cheers

Bob
Post Reply