Page 1 of 1
Rock Video & Sound w/o Can
Posted: Fri Jun 16, 2006 6:48 pm
by JakeThePimp
Third post and already something useful...
1.9mb Quicktime
Talk about gaining some street credit.
-JTP
Posted: Fri Jun 16, 2006 6:58 pm
by DJ Downunder
..very nice..
Don't-cha hate that big 'CLUNK' we sometimes get going into first gear..
The sound is a little less raspy once you put a tip on...love that idle sound..
...even the ride by sounded good.
I've had 3 of 4 different tips on and found they all sound a little different from each other.
Thanks for the clip.
DJ
Posted: Fri Jun 16, 2006 8:15 pm
by erock1150
Nice job!!!! I think you just convinced a bunch more people to de-can their bike.
erock
Posted: Sat Jun 17, 2006 4:25 am
by chris
So that's what I sound like!! Great stuff!
Posted: Sun Aug 20, 2006 7:59 pm
by kp
Ok. that's it. It's coming off tonight.
I ordered a tip a while ago but it still hasn't come in yet...
Posted: Sun Aug 20, 2006 8:59 pm
by kp
Wow.
It's off.
It sounds amazing. Now if that tip will only come in...I can put the shield and the tip on eventually...
Thanks for the vid! It's great!
Posted: Tue Aug 22, 2006 5:50 pm
by kp
The company I ordered a tip from seems to have disappeared off the face of the planet.
http://www.californiamuffler.com. I think I'll go the kragen route..
Posted: Tue Aug 22, 2006 8:28 pm
by NHighCotton
If anyone comes up with a cool exhaust tip please pass it on.
I've got a galvanized 45 degree tip that's screaming to be chromed or replaced.
The local AutoZones pickings are pretty slim.
Posted: Wed Aug 23, 2006 2:16 pm
by Boxerpunk
NHighCotton wrote:If anyone comes up with a cool exhaust tip please pass it on.
I've got a galvanized 45 degree tip that's screaming to be chromed or replaced.
The local AutoZones pickings are pretty slim.
http://www.tajco.dk/Default.asp?ID=20 ; should be available almost everywhere.
Exhaust
Posted: Mon Sep 04, 2006 9:00 pm
by BigRockR
I removed my can about a monthe ago...Gained some power on the top end...Then I got my hands on a Ztechnik full Titanium system....unbelievable sound, power, and punch. Gained 26% touque and 15% hp....more punch in the low and mid range. As far as a pipe though coming off the CAT...I went to a muffler shop, had them cut and bend to my spec, then had them cut a slash on the tip....Too Cool...then have them swedge it enough to slip on the pipe...drill a thru-hole and run a stainless bolt through....stays on and looks good....
Posted: Sun Sep 10, 2006 5:04 am
by Lean Angle
Wow, 26% more torque and 15% more hp from a simple muffler change? I'd love to see the before and after dyno chart, could you please post it? TIA
