BMW R1200R R1150R/T F800 K1200R R1100R/T R1250R RnineT Message Board

So I just had the dealer replace the clutch and slave cylinder.

Now the bike does not idle well and will stall out; I am thinking TPS or throttle bodies not being synced?

Bike runs pretty well above 3,000 rpm; sputters a little when you get off the throttle.

I have spark in both cylinders runs well with TPS unhooked.

Shaggy. immediately check that your throttle cables are fully seated. particularly the right. they like to pop out when removing the tank, making that throttle WAY too far open. thus it runs better when you open throttle more, they get closer to balance.

Cable seat is kind of in the way of bolts, wires, and hoses. happens ALL the time.



after that, do a motronic reset.