BMW R1200R R1150R/T F800 K1200R R1100R/T R1250R RnineT Message Board

The Motronic on my 2003 R1200CLC can be reset to defaults and put in learning mode by turning on the ignition without starting, then turning the throttle grip all the way back and releasing three times, then turning off the ignition.

Is there a similar procedure for the R1100R?

Yup!
Pull main fuse to Motronic. Let it sit for a minute, then replace fuse, turn ignition on and do the WFO to idle throttle reset twice. Then you are done

Thanks

Will consult my Haynes for the main fuse, or disconnect battery.