Checking the oil
Posted: Fri Aug 01, 2008 7:31 am
How do y'all check your oil?
Sounds like a simple question. The manual tells you to do it with the engine hot, 5 minutes after you shut it off. But I'm not very good at doing that. I'm usually hot/cold/tired/hungry/thirsty after I come home, and I really want to be doing something other than waiting for the oil to drain down. So I'd rather leave the bike on the center stand overnight and check the oil the next morning (T-CLOCS?). It also seems to me that that procedure would give more consistent results.
I understand that oil expands with increasing temperature. But is the expansion significant? In other words, if I set the oil level, say, to the middle of the sight glass after the overnight rest, how different will the level be when measured using the "official" procedure? Is there any other reason why this might be a bad idea?
Sounds like a simple question. The manual tells you to do it with the engine hot, 5 minutes after you shut it off. But I'm not very good at doing that. I'm usually hot/cold/tired/hungry/thirsty after I come home, and I really want to be doing something other than waiting for the oil to drain down. So I'd rather leave the bike on the center stand overnight and check the oil the next morning (T-CLOCS?). It also seems to me that that procedure would give more consistent results.
I understand that oil expands with increasing temperature. But is the expansion significant? In other words, if I set the oil level, say, to the middle of the sight glass after the overnight rest, how different will the level be when measured using the "official" procedure? Is there any other reason why this might be a bad idea?